Traffic-Limit - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
Parameter
inbound: Mirrors inbound packets at the port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and advanced
ACLs. acl-number: Sequence number of ACL, ranging from 2000 to 3999. acl-name:
Name of the ACL, which must be a character string starting with an English letter (a-z or
A-Z), and without any space or quotation mark in it.
rule rule: Specifies the subitem of an active ACL, ranging from 0 to 127; if not specified,
all subitems of ACL will be activated.
system-index index: Specifies the system index value of the rule which will be indexed
during operation. After delivering a rule, the system automatically assigns a globally
unique index value to the rule. When using this command to deliver a rule, you can also
specify a system index value for the rule. In general, you are not recommended to
specify this parameter manually.
Description
Use the packet-filter command to activate the ACLs in VLAN.
Use the undo packet-filter command to deactivate an active ACL.
Example
# Activate ACL 2000 of each port in VLAN 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 2
[Quidway-vlan2] packet-filter inbound ip-group 2000

4.1.3 traffic-limit

Syntax
traffic-limit inbound ip-group { acl-number | acl-name } [ rule rule [ system-index
index ] ] [ tc-index index ] cir cbs ebs [ pir ] [ conform { { remark-cos |
remark-drop-priority }* | remark-policed-service } ] [ exceed { forward | drop } ]
undo traffic-limit inbound ip-group { acl-number | acl-name } [ rule rule ]
View
VLAN view
Parameter
inbound: Implements traffic policing for data packets received on the port.
ip-group { acl-number | acl-name }: Activates the ACL identified by the acl-number or
acl-name argument. The ACL here can be a basic ACL or an advanced ACL.
Chapter 4 VLAN-ACL Configuration Commands
Huawei Technologies Proprietary
4-3