Routing-Table Limit - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Parameter
link-group { acl-number | acl-name } [ rule rule ]: Layer 2 ACL, acl-number is in the
range of 4000 to 4999. acl-name is a string beginning with English letters (a to z and A
to Z) with no spaces or quotation marks between. rule rule: Optional, ACL matching
statement, in the range of 0 to 127. All matching statements will be selected if you skip
this keyword.
ip-group { acl-number | acl-name } [ rule rule ]: Basic or advanced ACL. acl-number is
in the range of 2000 to 3999. acl-name is a string beginning with English letters (a to z
and A to Z) with no spaces or quotation marks between. rule rule: Optional, ACL
matching statement, in the range of 0 to 127. All matching statements will be selected if
you skip this keyword.
interface { interface-name | interface-type interface-number }: Redirect a packet to a
specified Ethernet port. interface-type can be GigabitEthernet and Ethernet.
interface-number suggests a complete port name with interface-type.
system-index index: Intra-system index of the rule, in the range of 0~4294967295.
The system assigns automatically an index to it when delivering an ACL rule, for later
retrieval. You can also assign a system index to it when delivering an ACL rule with this
command. However, generally you are not recommended to do so.
Description
Use the traffic-redirect command to redirect the data flow at the port of the EX card to
the port of the MX card and make the port on the EX card act as an MPLS VPN CE side
interface.
Use the undo traffic-redirect command to cancel this configuration.
Example
# Redirect the data flow at the Ethernet3/1/4 of the EX card to the MX card and set the
port belong to VLAN 24.
[Quidway-Ethernet3/1/4]
system-index 1 interface Ethernet5/1/4 24 l3-vpn
# Cancel the redirection configuration.
[Quidway-Ethernet5/1/4] undo traffic-redirect inbound ip-group 2000 rule 0

2.1.66 routing-table limit

Syntax
routing-table limit integer { alarm-integer | syslog-alert }
undo routing-table limit
Chapter 2 BGP/MPLS VPN Configuration Commands
traffic-redirect
Huawei Technologies Proprietary
2-54
inbound ip-group 2000 rule 0