Huawei Quidway S8500 Series Command Manual page 492

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Chapter 8 Recursive Routing Configuration
8.1 Recursive Routing Configuration Commands
8.1.1 route-rely
Syntax
route-rely [ bgp | static ]
undo route-rely [ bgp | static ]
View
System view
Parameter
bgp: Specifies routes learned by the BGP as the type of routes to be controlled.
static: Specifies static routes as the type of routes to be controlled.
Description
Use the route-rely command to enable recursive routing.
Use the undo route-rely command to disable the recursive routing.
By default, both routes learned by the BGP and static routes support recursive routing.
Example
# Disable recursive routing for static routes.
<Quidway>system-view
[Quidway] undo route-rely static
# Restore the default recursive routing function.
[Quidway] route-rely
Huawei Technologies Proprietary
8-1
Chapter 8 Recursive Routing Configuration