Advertisement
CONVERTIBLE MAINTENANCE
23-87
stalled, press the moulding on to the retainer and in-
stall the moulding caps and screws.
(41) Position the mouldings on the quarter panels
and rear window moulding retainers and install snap
retainer and screw assemblies. Do not overtighten.
(42)
Test the operation of the top assembly and in-
spect the fit of the top at the windshield header, door
and quarter window areas. Adjust the linkage, doors
or quarter window as necessary.
(43) Remove masking tape and protective covers.
Hide quick links:
Advertisement
