Advertisement
21 -82
TRANSMISSION-TORQUEFLITE
SCREWS (3)
GEARSHIFT
\
CABLE
1
ADAPTER
NK 163
A N D SHAFT
/-
THROTTLE LEVER STOP SCREW ASSY.
TOOL (REPAIR STAND)/
Fig. 71-Valve
Body and Control Assembly
the spring force, remove the three bracket retaining
screws (Fig. 71).
(3) Remove the spring retainer, torque converter
control valve spring, and the regulator valve spring
with line pressure adjusting screw assembly.
NOTE: Do
not alter the setting of the line pressure
adjusting screw and nut. The nut has an interfer-
ence thread and does not turn easily on the screw.
(4)
Slide the regulator valve out of the valve body.
Slide the torque converter control valve out of the
valve body.
ONE LARGE STEEL BALL
v
$ 1 -
CHECK VALVE
FIVE SMALL STEEL BALLS
Fig. 73-Front
Pump Check Valve and Steel Ball
Locations
(5)
Remove the 14 transfer plate retaining screws.
Carefully lift the transfer plate and steel plate assem-
bly off the valve body.
(6)
Invert the transfer plate assembly and remove
the stiffener plate. Remove remaining screws secur-
ing the steel plate to transfer plate, and carefully lift
off the steel plate (Fig.
62).
Remove the rear pump
check valve and spring.
(7) Remove the reverse blocker valve cover and lift
out the spring and valve.
( 8 )
Note location of the six steel balls in the valve
body, one is larger than the other five and is in the
STIFFENER PLATE
/
BLOCKER VALVE A N D COVER
I
STEEL PLATE
N K 164
Fig. 72-Transfer
and Steel Separator Plate
Assembly IDisassembled)
Hide quick links:
Advertisement
