Download Print this page

Plymouth Valiant V-100 1965 Service – Technical Manual page 637

Advertisement

GLASS
23-67
Fig. 148-Rear
Window Replacement
IAVP29 Models1
the soap solution and install the upper, lower, and
side mouldings.
(8) Reseal glass and test for water leaks.
Removal
IAV
Models)
(1) Starting at the bottom of the rear window, pry
out the mylar trim strip (Figs. 147 and 148) from the
weatherstrip.
(2)
Insert the fibre strick between the weatherstrip
and the glass and strip the weatherstrip from the
glass.
(3) With an assistant holding the glass, push out
the glass from either upper corner of the body open-
ing.
(4)
Remove the rear window weatherstrip from the
L A T C H IN OPEN POSITION
N E R W H E E L HOUSE
Q U A R T E R P A N E L
body flange if found to be distorted, cut or torn. Test
the flange (fence) for bends and rough surfaces, and
repair as required.
/nsta//ation
(1) If the weatherstrip
was
removed, remove all old
sealer from the flange. Apply a small bead of weath-
erstrip cement in the body flange groove of the
weatherstrip.
(2)
Carefully position the weatherstrip over the
body flange, making sure
it fits
smoothly and evenly
over the entire flange especially at the corners.
(3) Coat the channel of the weatherstrip with
min-
eral spirits.
(4) Center the glass in the opening and insert the
top edge of the glass into the top channel of the
weatherstrip.
( 5 )
Using a tapered fibre stick, work the weather-
strip over the edge of the glass. Bump the glass
into
place with the palm of the hand.
(6)
Air dry the weatherstrip.
(7) Apply weathersealing compound between the
glass and weatherstrip.
(8)
Use mineral spirits as a lubricant and a fibre
wedge or an other suitable tool and work the trim
strip into the rubber.
(9) Clean all excess sealer from the rear window
glass.
QUARTER WINDOW (Station Wagon)
Removal
IAP Models)
it
is first necessary to remove the spare tire cover.
To remove the quarter window on the right side,
(1) Pull the spare tire cover handle outward to re-
FRONT
-
\
BELT BAR
RETAINER
NK955
Fig. 150-Pillar and Belt
Bar
Retainers
fAP Models)
Fig. 149-Spare
Tire Well Cover IAP Modelsj

Hide quick links:

Advertisement

loading