Advertisement
23-1 8
INTERIOR T R I M AND SEATS
(2) Raise the seat and track assembly until the
track mounting bolts clear the floor pan about one
inch.
(3) Place
Y 2
inch thick spacers over each of the
four track mounting bolts.
(4)
Reinstall the seat and track assembly and tight-
en securely to the floor pan.
Front Seat Replacement
The front seat cushion is an integral part of the
seat frame. The seat frame is attached to the adjust-
ing track, by studs and nuts, which in turn is attached
to the stationary plate by bolts. To remove the seat
assembly, remove the four nuts, from under the floor
pan, attaching the stationary plate to the floor pan.
Rear Seat Replacement
The rear seat cushion is held in place by inserting
the rear edge of the seat cushion under the lower
edge of the seat back. The front lower frame of the
seat engages into a slotted bracket welded to the floor
pan.
The rear seat back is held in place by two tangs of
the upper edge of the seat frame being inserted into
slots in the package shelf. The lower edge of the
seat back is held in place by two metal strips of the
floor pan being bent over the lower edge of the seat
back frame.
Station Wagon Rear Seats
Removal (Second Seat
Backl
(1)
Remove the screws attaching the second seat
back to the hinge assemblies (Fig. 30).
(2) Release the spring type retainer catches from
the seat back and remove the seat back assembly.
Installation (Second Seat
Backl
semblies.
(1)
Position the second seat back on the hinge as-
TAPPING PLATE
SEAT
C U S H I O N
64x521
Fig. 3 L S t a t i o n Wagon Second Seat
Installation IAR Models)
Fig. 31-Second
Seat Cushion IAP Models)
(2)
Install the hinge to seat back screws and tight-
en to 80-120 inch pounds.
(3) Test the engagement of the seat back catches
on the seat back and adjust as necessary. Adjustment
of the catches is possible only in the IN and OUT di-
rections.
Removal (Second Seat Cushion)
(1)
Raise the rear floor hinged panel at the rear
of
the seat cushion assembly to expose the seat cushion
to floor pan attaching screws.
(2) Remove the screws attaching the seat cushion
to the floor pan (Fig. 31).
(3) Move the seat cushion slightly rearward to dis-
engage the locking bars at the front bottom side of
the seat cushion, from the floor brackets.
(4)
Remove the seat cushion assembly.
Installation (Second Seat Cushionl
(1)
Place the seat cushion in position, making cer-
64x523
Fig. 32-Seat
Back Attachment IAR-AV Models)
Hide quick links:
Advertisement
