Advertisement
0-1 8
LUBRICATION
Fig. 40-Fuel
F i l t e r 4 1 8 , 3 6 1 , 3 8 3 and 426
Cu. In. Engines
FUEL FILTER
Accumulation of large quantities of foreign matter
in the fuel filter due to operating conditions or con-
tamination of fuel will restrict the flow of fuel to the
carburetor.
Fuel filters (Fig. 38, 39 and 40) are of the disposa-
ble type and should be discarded when removed. Aft-
er installing the new filter, run the engine for several
minutes and check for leaks at the connections.
MANIFOLD HEAT CONTROL VALVE
Freedom of movement of the heat control valve by
removing lead deposits from the valve shaft bearings
is assured by application of Manifold Heat Control
Valve Solvent, Part Number 1879318.
Apply the solvent when the manifold is COOL to
be sure that the deposits will dissolve properly. When
applying the solvent at the ends of the shaft (Figs. 41,
42 and 43) move the valve back and forth and in and
out to properly distribute the solvent to make sure
the deposits are dissolved.
Fig. 41-Manifold
Heat Control V a l v e 4 - C y l .
Fig. 42-Manifold
Heat Control V a l v e - 2 7 3
Cu. In. Engines
Fig. 43-Manifold
Heat Control Valve-
361,383 and 426 Cu. In. Engines
& 1 2 ) 1 '
Fig. 4"Distributor-Lubrication
P o i n t s 4 - C y l .
Hide quick links:
Advertisement
