Advertisement
BRAKES-POWER
BENDIX
5-1 5
cable housing and clip down out of the pedal assem-
bly bracket.
(7)
Remove the cable to the floor pan clip and work
the cable and housing assembly up through the floor
pan.
Installing the Front Parking Brake Cable
(1)
Insert the rear end of the brake cable and hous-
ing down through the cable routing hole in the floor
pan.
(2)
Engage the upper end of the cable and housing
assembly up through the pedal assembly bracket and
firmly attach the housing and clip into the bracket.
(3) Depress the parking brake pedal and insert the
end of the cable into the parking brake pedal clevis.
(4)
Insert the cable through the body crossmember
and firmly press into place the housing and attaching
clip.
( 5 )
Attach the front cable to the equalizer bar.
(6)
Adjust the service brakes and parking brake ca-
ble.
(7)
Apply the brakes several times and test for free
wheel rotation when the parking brake is in the "off"
position.
POWER BRAKE-BENDIX
Description
The master and vacuum cylinder is mounted direct-
ly to the engine side of the dash panel. The vacuum
piston is hooked directly to the suspended brake pedal
by a valve operating rod.
The Bendix Power Brake Unit can be identified by
the crimped edge method of attaching the housing
and cover together.
N Y 1373
Fig. 19-Bendix
Power Brake Assembly
Hide quick links:
Advertisement
