Advertisement
LUBRICATION
0-23
against rust and wear, the body mechanism and
throttle linkages will require lubrication.
Prior
to
applying any lubricants, the parts should
be wiped clean to remove dust and grit. The excess
oil or lubricant should be removed.
Particular attention should be given to external
lock cylinders during fall and winter months to in-
sure protection from water and ice.
Lubricate the following in accordance with the
Certified Car Care Schedule:
Hood Hinges-AV-7,
AV-2 Models
Apply Lubriplate, Part No. 1064768, sparingly to
pivot contact areas, including torsion bar contacts
(Fig. 55).
Hood Hinges-AR-
7
I
AR-2 Models
Apply Lubriplate, Part No. 1064678, sparingly to
pivot contact areas, including torsion bar contacts
(Fig. 56).
PIN
FRONT DOOR
UPPER
REAR
DOOR
UPPER
Fig. 58-Door
Hinges-Lubrication
Points-AV-I,
AV-2 Models
PIN
PIN
REAR
DOOR U P P E R
FRONT DOOR
UPPER
FRONT DOOR LOWER
REAR
DOOR LOWER NK631
Fig. 59-Door
Hinges-Lubrication
Points-AR-l ,
AR-2, A P - I , AP-2 Models
Hood Hinges-AP-
7
I
AP-2 Models
Apply Lubriplate, Part No. 1064768, sparingly to
pivot contact areas, including torsion bar contacts
(Fig. 57).
Door Hinges-AV-7,
AV-2 Models
On all hinges, apply light engine oil sparingly to
hinge pins and contact surfaces of the hinge halves
(Fig. 58).
Avoid lubricant on roller surfaces of hinge
arm and roller.
Door Hinges-AR-7,
AR-2, AP-7, AP-2 Models
On all hinges, apply light engine oil sparingly to
hinge pin and contact area of bushing and body half
of
hinge (Fig. 59).
On lower hinges, apply light engine oil sparingly to
the spring ends (Fig. 59).
On front door lower hinge, apply light engine oil
sparingly to contact area of pin, arm and spacers (Fig.
59).
On rear door lower hinge, apply light engine oil
sparingly to roller pin and contact areas between roll-
er and body hinge half, and pin and contact areas of
door hinge half and check arm (Fig.
59).
Avoid lubri-
cant on roller surfaces of hinge arm and roller.
Door Striker Rotor-All
Models
rotor inside bearing surfaces (Fig. 60).
Apply two or three drops of light engine oil to the
Door Striker Plates-All
Models
edge of plate on door frame (Fig. 60).
Apply Stainless Stick Lubricant sparingly to upper
Deck lid latch-All
Models
inner pivot and sliding contact surfaces (Fig. 61).
Apply Lubriplate, Part No. 1064768, sparingly
to
I
ROTOR
64
x
425
Fig. 6 L D o o r Striker Rotor and Striker Plate
-Lubrication
Points-All
Models
Hide quick links:
Advertisement
