Download Print this page

Plymouth Valiant V-100 1965 Service – Technical Manual page 626

Advertisement

23-56
GLASS
(9) Install the water shield, trim panel and regulator
handle.
Rear
Track
Assembly
Removal fAP Models)
(1) Remove the regulator handle, trim panel and
watershield.
(2) Remove the nuts and washers attaching the
rear track assembly to the belt line reinforcement
(Fig. 121).
(3) Remove the lower sleeve nut from the hole in
the support on the inside panel, the top sleeve nut of
the track from the belt reinforcement and the roller
from the slot in the glass lower frame.
(4)
Remove the track assembly from the door
through the large access opening.
Installation
(1) Position the track assembly into the door
through the large access opening.
(2) Insert the roller assembly into the slot in the
glass lower frame.
(3) Insert the track top sleeve nut into the hole in
the belt reinforcement and the lower sleeve nut into
the hole in the support on the inside panel.
(4)
Install the nut and washers attaching the track
to the belt reinforcement.
( 5 )
Test the window for alignment and ease of op-
eration.
(6)
Install the water shield, trim panel and regulator
handle.
Quarter Glass Channel
Removal fAR and AP Models)
(1) Remove the rear seat cushion and back.
(2) Remove the quarter panel hardware, trim and
water shield.
Fig. 1 2 2 4 u a r l e r Window Adjustments-
Convertible IAP Models)
Fig. 7 2 3 4 u a r t e r Window Adjustments-
Convertible
IAR
Models)
(3) Remove the quarter window glass.
(4)
Remove the glass run channel attaching bolts
and remove the glass run channel.
lnstalldion
(1) Position the glass run channels on the mount-
(2) Install the quarter window glass.
(3) Adjust the glass.
(4) Install the water shield, trim panel and hard-
( 5 )
Install the seat cushion and back.
ing brackets and install the retaining bolts.
ware.
QUARTER WINDOW
(Convertible)
Adjustments
points and methods of adjustment.
water shield.
Refer to Figure 122, 123 and 124 for the adjusting
(1) Remove the regulator handle, trim panel and
NK1162
Fig. 7 2 4 - Q u a r t e r Window Adjustments-
Convertible IAV Models)

Hide quick links:

Advertisement

loading