Plymouth Valiant V-100 1965 Service – Technical Manual page 646

23-76 SEALING
VIEW I N DIRECTION
O F ARROW X
Fig. 167--Tail Gate Opening IAP Models)
Inspect the glass for proper fit. Be sure to adjust
the lift so that when the glass is raised it
fits
squarely
into the top channel and compresses against the run.
If the glass does not seat in the run when in a closed
position, it is possible for dust, water and carbon
monoxide gas to be pulled in around the top of the
glass.
Tail Gate
Sill
and Floor Panel
Apply a
3 h
inch bead of sealer to the seam of the
left wheelhouse inner panel and the wheelhouse to
tailgate opening sill extension. Apply sealer to the
rear floor pan and center floor pan (Fig. 169).
Apply a 3h inch bead of sealer to the rear floor
pan
rear panel, tail gate opening sill panel and the rear
floor pan and wheelhouse inner to tail gate opening
sill left extension.
Apply a 3h inch bead of sealer to the seam of the
Fig. 168--Tail Gate Seals and Weatherstrips
IAP Models)
I
FLOOR PAN
RIGHT HAND SIDE
NK927 PAN REAR PANEL
Fig. 169-lail Gate Sill and Floor Panel
IAP Models)
wheelhouse inner right panel, rear floor pan and cen-
ter floor pan.
Apply a
YE
inch bead of sealer to the seam of the
rear floor pan rear panel and rear
floor
pan.
The sealer should be brushed into the seams to ef-
fect a proper seal.
Spare Tire Compartment
Apply a
Y
inch bead of sealer to the seam of the
rear lower pillar to wheelhouse front support and to
the rear floor pan to rear crossmember extension and
spare tire housing lower panel (Fig.
170).
Apply a 9-6 inch bead of sealer to the seam of the
spare tire housing lower panel and the wheelhouse
inner panel to the sill extension. Apply sealer to the
seam of the wheelhouse front panel and the spare tire
housing lower panel.
The sealer should be brushed into the seams to ef-
fect a proper seal.
OF ARROW Z
V
SEALER SEALER NK926
Fig. lIO--Spare Tire Compartment IAP Models)