Plymouth Valiant V-100 1965 Service – Technical Manual page 638

23-68 GLASS
lease the latch from the well (Fig.149).
(2) Pull the bottom portion of the cover outward
until the latch clears the well area.
(3) Push the cover assembly upward to release the
cover from the retention clips and remove the cover
assembly.
(4)
Remove the quarter window garnish mouldings.
(5) Remove the front upper pillar glass and weath-
erstrip lock retainer screws and retainer (Fig. 150).
(6)
Remove the rear upper pillar glass and weath-
erstrip retainer screws and retainer.
(7) Remove the glass and weatherstrip belt bar re-
tainer screw and retainer.
(8)
Remove the roof side rail support retainer from
the quarter window area (Fig. 151).
(9) Remove the quarter window and weatherstrip
assembly from the opening (Fig. 152).
(10) Remove the weatherstrip from the glass.
lnsf allat ion
(1)
Install the weatherstrip on the quarter glass.
(2) Position the glass and weatherstrip assembly in
the window opening from inside the vehicle (Fig.
151).
(3) Position the roof side rail retainer (Fig. 151) to
the mating under surface of the side rail support and
install the retaining screws.
(4)
Position the wheelhouse belt bar retainer to the
belt bar and install the retaining screws (Fig. 150).
(5) Position the rear pillar upper retainer on the
end of the belt bar retainer and rear pillar. Install the
retaining screws.
(6)
Position the body lock upper front pillar re-
tainer on the end of the belt bar retainer and the pil-
lar. Install the retainer screws.
(7)
Install the garnish mouldings.
( 8 )
Position the spare tire cover (Fig. 149), with
NK958
Fig. 151-Glass and Weatherstrip Roof Rail
Retainer IAP Models)
WEATHERSTRIP
NK963
Fig. 1 5 2 4 u a r t e r Window Installation
IAP Models)
I
WEATHERSTRIP
I
VIEW IN CIRCLE A
NK821
Fig.
I 5 3 4 u a r t e r
Window
IAR-AV
Models)