Advertisement
11-12
EXHAUST SYSTEM
(3) Place the counterweight on the shaft with the
shield in the upper position and insert the lock in the
shaft slot.
(4)
Center the counterweight on the shaft and turn
the valve counterclockwise until the bumper passes
the
stop pin (Fig. 28).
(5)
Press the counterweight on the shaft until
it
is
seated. Tighten the clamp bolt to
50
inch-pounds,
us-
ing Tool C-3380 Torque Wrench.
(6)
Make sure the anti-rattle spring on the opposite
end of the shaft is in place. Test operation
of
the
valve.
Hide quick links:
Advertisement
