Advertisement
0-28
LUBRICATION
NK393
Fig. 74-Throttle
Linkage-Lubrication
Points fModels A R-2 and 8 Cyl. Engine
Throttle Linkage-AV-
7
Models
Of
Automotive Multi-Purpose
Grease' NLG1 grade
to
the
exterior surfaces
Of
the
insulator on the throttle shaft (Fig.
70),
the ball joint
located on the passenger side of the dash panel and
between the plastic bushing and throttle rod and
bearing areas on bellcrank pin.
Throttle Linkage Lubrication-A V-2 Models
film of Automotive Multi-Purpose Grease, NLGI grade
2, to both ends of the accelerator shaft at the mount-
ing bracket (Fig. 71) and on underside
of
the acceler-
ator pedal where it contacts accelerator shaft lever
and the
areaS of the upper engine mounted
bellcrank.
On
Models with
Automatic
Transmission, apply
a
thin film of Automotive Multi-Purpose Grease, NLGI
grade 2, to both ends of accelerator shaft at the brack-
et (Fig. 71); at the underside of the accelerator pedal
where it contacts accelerator shaft lever; pivot points
a
thin
On Models with Manual Transmission, apply a thin
NK395
Fig. 7 L l h r o t t l e Linkage-Lubrication Points fModels
AP-1 J
Hide quick links:
Advertisement
