Fujitsu MB90480 Series Hardware Manual page 575

[bit4, bit3] PMT1,PMT0 (invert output)
These bits are used to invert the output of each pulse.
PMT1 PMT0
0 0
0 1
1 0
1 1
These bits are initialized to "00
[bit2, bit1, bit0] Undefined bits
These bits are undefined and not used. In ordinary cases, set them to "000
CHAPTER 26 μPG TIMER (ONLY MB90485 SERIES)
Operation control function
Waveform at the start (initial value)
Only MT00 inverted
Only MT01 inverted
MT00 and MT01 inverted
" at reset.
B
".
B
553