CHAPTER 23 2M/3M BIT FLASH MEMORY
23.6.6 Resuming the Sector Erasure of Flash Memory
This section describes the procedure for issuing the sector erase resume command
and resuming a suspended flash memory sector erase operation.
■
Resuming the sector erasure of flash memory
To resume a suspended sector erase operation, send the sector erase resume command in the
command sequence table (see Table 23.4-1) to the internal flash memory.
The sector erase resume command is used to resume a sector erasure from the sector erase
suspend mode caused by a sector erase suspend command. This command is executed by
writing the erase restart code (30
area.
Issuing the sector erase restart command during a sector erase operation will be ignored.
502
) while specifying an arbitrary address in the flash memory
H