Table of Contents
Advertisement
CHAPTER 12 16-BIT INPUT/OUTPUT TIMER
[bit5, bit4] ICE1, ICE0
These bits are the interrupt permit bits of output compare. If these bits are set to "1" and an
interrupt flag (ICP1, ICP0) is set, an output compare interrupt occurs.
0
1
•
ICE1: Corresponds to output compare 1/3/5
•
ICE0: Corresponds to output compare 0/2/4
[bit3, bit2] Unused bits
These bits are not used.
[bit1, bit0] CST1, CST0
These bits permit a matching operation with the compare register and free-running timer.
0
1
•
CST1: Corresponds to output compare 1/3/5
•
CST0: Corresponds to output compare 0/2/4
Before a compare operation is permitted, specify the compare register value.
Note:
Output compare operates in sync with the free-running timer clock. Thus, if the free-running timer
stops, the compare operation also stops.
232
Output compare interrupt prohibit (initial value)
Output compare interrupt permit
Compare operation prohibit (initial value)
Compare operation permit
Advertisement
Table of Contents
