Display Current Default Gateway Ip Address; Ggw: Get Default Gateway - 3Com CoreBuilder 9000 User Manual

70 C 5: C
HAPTER ONFIGURING THE
Display Current
Default Gateway IP
Address
P
LATFORM
Display the current Default Gateway IP address. The Default Gateway is
used to locate the network management station (NMS) if the NMS is not
found in the local IP subnetwork.
Command Actions
Enter the menu sequence: (1) SYS: Platform configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 3 1
The following message is displayed:
Current Default Gateway address: 151.104.78.20
The current default gateway IP address is displayed.
(1) SET: Switch setup
(2) MNG: Management setup
(3) GWY: Default Gateway Setup

(1) GGW: Get Default Gateway

1 1 2 3 1
The current default gateway IP address is displayed.
Current Default Gateway address: