Port-To-Port Filtering - 3Com LinkBuilder MSH User Manual

1-26 C 1: I
HAPTER

Port-to-Port Filtering

A port-to-port filter set is a group of ports that are allowed to
communicate through the bridge. There is a port-to-port filter set
for each bridge port.
Figure 1-24
example.
a bridge. The ports' filter sets have been set up, allowing
communication between ports 1 and 2, ports 1 and E, and ports
2 and 3.
Figure 1-24 Port-to-Port Filtering Example
Figure 1-25
Figure 1-25 Allowable Port Communication
NTRODUCTION
and Figure 1-25
Figure 1-24 shows four network segments connected by
shows the port communications that are allowed.
illustrate a port-to-port filter
DUA1860-0AAA01