Rev 1 Dec. 17
6. In the Device Status on Login Screen field, select Enable. (For details, see
Device Status Screen
Figure 2-2: ACEmanager: Main Login screen with Location and Device Status enabled.
If you have Location fields selected on the Device Status screen, but Location
Service is disabled, the gateway Login screen will show Location Service
Disabled.
Recovery Mode
In the unlikely event that ALEOS becomes corrupted, or, if the gateway is
unresponsive to ACEmanager input and AT commands, you can manually put the
gateway into recovery mode.
Recovery mode enables you to update the ALEOS software and return the
gateway to working order.
Note: To use Recovery Mode, you must update older gateways to ALEOS 4.7.0 or later
and use the
*RCVRUPDATE
manager. These steps must be done while the gateway is operating normally. For
gateways shipped from the factory with ALEOS 4.8.0, no action is required.
Note: ALEOS software updates done in Recovery mode do not preserve any custom
setting such as cellular settings, AAF applications, etc.
To enter Recovery mode:
1. Use an Ethernet cable to connect the gateway to your computer. (Recovery
mode is not supported on USBnet.)
15
on page 223.)
command (see
page
400) to install the recovery mode
Gateway Configuration
41111088