Sierra Wireless AirLink RV50 Series User Manual page 104

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
PNTM Configuration #
Status #
Destination IP #
Rev 1 Dec. 17
To configure PNTM:
1. In ACEmanager, go to WAN/Cellular > PNTM Configuration.
Figure 4-23: ACEmanager: WAN/Cellular > PNTM Configuration
2. Configure the PNTM parameters as described in the following table.
Configure all the fields for the PNTM before you set this field to Enable. Once the PNTM is
enabled, all the fields are read-only and this field shows the status of the PNTM
connection.
Note: Alway click Apply after enabling or disabling this feature.
Enter the destination IP address.
104
Description
41111088