Sim Pin; Enable The Sim Pin - Sierra Wireless AirLink RV50 Series User Manual

Field
Network User ID
Network Password
Rev 1 Dec. 17
Description
Enter the Network User ID, if it is required for the wireless network.
Enter the Network Password, if it is required for the wireless network.

SIM PIN

If you have a SIM card with a PIN configured, you can configure ALEOS to enter
the PIN on reboot, so human intervention is not required.
This feature has two requirements:
• A PIN-locked SIM card—Contact your Mobile Network Operator to ensure
that they support this feature and to obtain a PIN-locked SIM card and PIN.
• The SIM PIN feature in ACEmanager must be enabled. See
PIN.
If the AirLink gateway has a PIN-locked SIM installed and this feature is not
enabled in ACEmanager, the AirLink gateway is unable to go on air and the
Network Status field on the Status > Home screen displays the message "SIM
PIN incorrect, # attempts left".
Note: On gateways with ALEOS 4.7.0 or later, you can use AT Commands to enable,
disable, or change the SIM PIN the SIM card requests when the gateway boots up. For
details, see *CHGSIMPIN

Enable the SIM PIN

To enable or enter the SIM PIN:
1. In ACEmanager, go to WAN/Cellular.
2. Click the SIM PIN button. The following pop-up window appears.
3. Select Enable.
4. Enter the PIN (obtained from your Mobile Network Operator or set using
*CHGSIMPIN—see
5. Reboot the AirLink gateway.
After rebooting:
• The AirLink gateway uses the configured PIN on subsequent reboots.
83
on page 410 and *ENASIMPIN
page 410) twice and click Save.
WAN/Cellular Configuration
Enable the SIM
on page 413.
41111088