Configure Logs - Sierra Wireless AirLink RV50 Series User Manual

Rev 1 Dec. 17

Configure Logs

To configure what you want to include in the logs:
1. In ACEmanager, go to Admin > Log.
Figure 14-5:
Figure 14-6: ACEmanager: Admin > Log > Configure Logging
2. For each subsystem listed:
a. Select whether or not to display it in the log.
Separate filters, based on subsystem and severity, are applied when the mes-
sages are generated and when the messages are displayed. Six severity lev-
els are supported for filtering in the drop-down lists for verbosity:
· Error
· Warning
· Notice (default)
· Info (information)
· Debug
b. Select the verbosity level.
Note: Some log messages are only displayed if you display Linux Syslog. For example, If
you are debugging a VPN or LAN setup, the relevant information is only displayed in the
Linux Syslog.
321
Admin
41111088