Sierra Wireless AirLink RV50 Series User Manual page 280

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table 11-6: Serial Port Configuration > PPP / SLIP
Field
PPP / SLIP
This section is only visible when PPP or SLIP is selected in the
SLIP Protocol
SLIP Flow Control
Device PPP IP
Host PPP IP
Rev 1 Dec. 17
Figure 11-9: ACEmanager: Serial > Port Configuration > SLIP
Description
This field only appears when SLIP is selected in the
Select the type of Serial Line Internet Protocol (SLIP) to use
Options are:
Adaptive SLIP—Allows the gateway to determine the SLIP implementation (default)
•
SLIP—Traditional SLIP encapsulation
•
CSLIP—SLIP encapsulation with Van Jacobsen header compression
•
SLIP6—SLIP encapsulation with six-bit encoding
•
CSLIP6—SLIP encapsulation with Van Jacobsen header compression and 6-bit
•
encoding
This field only appears when SLIP is selected in the
Choose the SLIP data flow control setting. Options are:
Disable (default)
•
Enable
•
Flow control enables the receiving device to control the data flow. This is useful if the
receiving device has a heaver traffic load or less processing power than the sending
computer.
Sets the device IP address (in private mode)
Default is 192.168.15.31
Sets the host IP address (in private mode)
Default is 192.168.15.100
280
Startup Mode Default field.
Startup Mode Default
Startup Mode Default
field.
field.
41111088