Sierra Wireless AirLink RV50 Series User Manual page 258

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
Figure 10-10: ACEmanager: RV50X Events Reporting > Actions > Data Group
The reports attributes are:
• Digital and Analog I/O
Options are to include:
· Digital Input 1—The status of the digital input
· Digital Output 1—The status of the digital output
· Pulse Accumulator 1—The pulse count for the digital input
·
· Analog Input 1—The status of the analog input (reported in volts)
· Transformed Analog Input 1—The status of the analog input (reported in
units configured in ACEmanager I/O > Configuration—see
on page 302)
• Configuration on page 302AVL
Options are to include:
· Satellite Fix—Whether or not there is a usable location satellite fix
· Latitude—The latitude reported by the location fix
· Longitude—The longitude reported by the location fix
· Satellite Count—The number of satellites the location technology is using
to get a satellite fix
· Vehicle Speed—The speed of the vehicle reported by the location fix
· Vehicle Heading—The direction the vehicle is traveling reported by the
location fix
· Engine Hours—The number of hours the engine has been on, based on
either Power In or Ignition Sense
· Odometer—The number of miles reported by the location fix
· TAIP ID—The TAIP ID for the AirLink gateway
• Device Info
Options are to include:
· Device ID—The device ID (serial number) for the AirLink gateway
258
Configuration
41111088