Udp - Sierra Wireless AirLink RV50 Series User Manual

Table 11-4: Serial Port Configuration > UDP
Field

UDP

UDP Auto Answer
UDP Idle Timeout
(seconds)
Rev 1 Dec. 17
UDP
Figure 11-4: ACEmanager: Serial > Port Configuration > UDP
Description
Whether the AirLink gateway answers and incoming UDP connection request
Options are:
Disable (default)
•
Enable
•
You can also use an AT command to configure this field. See
UDP Idle Timeout in seconds
Specifies a time interval upon which if there is no in or outbound traffic through a UDP
connection, the connection is terminated.
0—No idle time-out
•
1–255 Timeout in seconds (Default is 50.)
•
You can also use an AT command to configure this field. See
Note: UDP Idle Timeout only takes effect if the
275
Serial Configuration
S82 on page 457.
S83 on page 457.
UDP Auto Answer is set to Enable.
41111088