Field
Reset Mode
Rev 1 Dec. 17
Description
Before resetting the AirLink gateway to the factory default settings, you can choose to
preserve the configured network connection settings. Options are:
Reset All—All settings including network settings are returned to the factory default
•
values on Reset to Factory Default.
Preserve Core Settings—(default) When the device is returned to factory default
•
settings (either by clicking the Reset to Factory Default button in ACEmanager, or
pressing the hardware reset button as described in the Hardware User Guide), the
following network settings are preserved:
Network User ID
•
Network Password
•
Network Authentication Mode
•
LTE Authentication Mode
•
APN Type
•
Select from the List (APN value)
•
User Entered APN
•
Backup APN
•
Backup Network Authentication Mode
•
Backup LTE Authentication Mode
•
Backup Network User ID
•
Backup Network Password
•
SIM Card PIN code
•
Primary SIM slot
•
Setting for Band Profile
•
Setting for Band26
•
Setting for Band41
•
Status of the last PIN lock/unlock attempt
•
ALMS Enabled/Disabled status
•
ALMS Name (Device name in ALMS)
•
Device Initiated Interval (ALMS)
•
ALMS Server URL
•
ALMS Auto Synchro
•
ALMS SSL Verify Peer
•
ALMS LWM2M Keep Alive Interval
•
ALMS LWM2M Register On Startup
•
HTTP Server and ACEview Services
•
Reset Mode
•
Network Operator Switching configuration and stored radio module firmware
•
ACEmanager Remote Access
•
Low Voltage Standby Mode
•
Standby Voltage (100 milliVolts)
•
Standby Qualification Period (seconds)
•
Resume Immediately at Voltage (100 milliVolts)
•
319
Admin
41111088