Sierra Wireless AirLink RV50 Series User Manual page 93

Rev 1 Dec. 17
Figure 4-17: ACEmanager: WAN/Cellular > Reliable Static Route (RSR) > Tracking Object
b. Under Tracking Object, enter the Test IP address, using a host behind the
gateway that has a reliable IP address, such as 8.8.8.8.
c. From the drop-down menu, select Ethernet 1 as the Test Interface.
d. Leave the default values for the Test Interval, Test Timeout, and
Maximum number of retries.
e. In the Tracking Object field, select Enable.
f. Click Apply.
g. The Tracking Object pings the Test IP address configured in
ACEmanager go to Status > RSR and note the result in the RSR Test
Result field.
3. Disable Tracking Object.
Note: Configure all the other fields before setting the Enable/Disable Reliable Static
Routing field. Once you enable RSR, some fields on this page are not editable.
4. Go to WAN/Cellular > Reliable Static Route (RSR) > Reliable Static Route
(RSR).
93
WAN/Cellular Configuration
step b. In
41111088