Sierra Wireless AirLink RV50 Series User Manual page 341

Windows Dial-up Networking (DUN)
If you are using a DUN connection with any other network connection (such as
Ethernet), you may need to use the route command in Windows to set up a static
route through the device to access the location remotely over the PPP link and
the mobile network. This guide does not provide information on the route
command. Consult your network administrator for information on properly
configuring routing.
Create a new network connection.
1. Select Start > Control Panel > Network and Sharing Center.
Figure A-17: Network and Sharing Center Window
2. Select Set up a new connection or network.
Rev 1 Dec. 17 341 41111088