Pntm Configuration - Sierra Wireless AirLink RV50 Series User Manual

Hide thumbs Also See for AirLink RV50 Series:
Table of Contents

Advertisement

Field
Dynamic Mobile Network Routing
Subnet 1 – 8 Accepted
Foreign Agent
Registration Status
Registration Response
Lifetime (seconds)
Total RRQ sent
Total RRP received
Reverse Tunnelling Agent
Reverse Tunnelling
Agent Status
Force Fragmentation
TX packets
RX packets
Rev 1 Dec. 17
Confirms that the subnet configuration is accepted. Options displayed are:
Yes—The subnet is configured and accepted.
No—The subnet is not configured or not accepted.
Foreign agent registration status
Options displayed are:
Pass—A response has been received from the Home Agent.
Fail—No response from the Home Agent.
Unknown—Initial state
Shows the length of the current lease time (in seconds).
Number of Registration Requests sent
Number of Registration Responses received
DMNR tunnel status
This field only appears when DMNR is enabled. Options displayed are:
Up—DMNR tunnel is up.
Down—DMNR tunnel is down.
Status of the Force Fragmentation field
Enabled
Disabled
For more information, see
Number of packets transmitted
The counter is reset when:
DMNR is disabled.
When the DMNR tunnel
Number of packets received
The counter is reset when:
DMNR is disabled.
When the DMNR tunnel

PNTM Configuration

This feature is available only on Verizon Wireless' private network.
You can use Private Network Traffic Management (PNTM) to tag and prioritize
traffic for up to 15 destinations.
For more information on private networking, contact Verizon Wireless.
103
Description
Force Fragmentation
on page 101.
(Reverse Tunnelling Agent
(Reverse Tunnelling Agent
WAN/Cellular Configuration
Status) is down.
Status) is down.
41111088

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents