Sierra Wireless AirLink RV50 Series User Manual page 194

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
The password you configure can be any alphanumeric string between 1 and
255 characters long.
For more information see
4. The SMS destination is the local interface where ALEOS forwards an SMS
from the mobile network.
In the SMS destination field, select from the following options:
· Serial—Messages are forwarded to the Serial port on the destination device.
If you want to include the phone number as part of the information sent to
the serial port, select Yes in the Include Phone Number on Serial field.
Proceed to step 13.
· IP—Messages are sent using UDP over IP to a designated LAN device.
Proceed to step 5.
Local Device Interface Configuration (Applies to inbound [to the local
device] gateway messages when IP is the SMS destination and outbound
[from the local device])
Inbound
5. Enter the Local Host IP address.
This is the IP address of the LAN device that is used as the destination for all
incoming Gateway messages.
6. Enter the Local Host Port.
This is the UDP port the destination device listens to for incoming messages.
Outbound
7. Enter the ALEOS port.
This is the UDP port on which the AirLink gateway listens for outbound Gate-
way messages sent from any local device.
Message Format Configuration (Only applies if you selected IP in the SMS
destination field)
8. In the Start field, enter the start of message delimiter, or use the default (<<<).
9. In the Field Delimiter field, enter the delimiter to be used between fields in the
SMS message, or use the default (,).
10. In the End field, enter the end of message delimiter, or use the default (>>>).
11. In the ACK field, enter the desired acknowledgment message, or use the
default (ACK). The acknowledgment is sent to the device as a UDP packet on
the same port as the device used to send the message.
ALEOS provides a message acknowledgment for every SMS message when
it is passed to the radio. If ALEOS does not send an ACK, wait for 30 seconds,
and then retry.
Security
12. If desired, configure SMS Security options (see
SMS Wakeup (see
SMS > Advanced on page 205).
13. Click Apply.
If you are using IP as the destination and you have changed the IPs or port
numbers, reboot the device.
194
SMS Password Security
SMS Wakeup on page 200), and Advanced options (see
on page 203.
SMS Security on page 201),
41111088