Sierra Wireless AirLink RV50 Series User Manual page 465

Table D-13: Applications > Data Usage Commands
Command
*DATACURDAYSIM2?
*DATAPLANUNITS
*DATAPLANUNITSSIM1
Rev 1 Dec. 17
Description
Display data usage for the current day (in kB) for the SIM card in Slot 2 (lower
slot).
Example:
AT*DATACURDAYSIM2?
<value>
OK
Query or set the units for the data usage report.
AT*DATAPLANUNITS? to query
AT*DATAPLANUNITS=<unit> to set
<unit>=1—Sets the units to Megabytes (MB)
•
<unit>=2—Sets the units to Kilobytes (kB)
•
Examples:
AT*DATAPLANUNITS?
<unit>
OK
AT*DATAPLANUNITS=<units>
OK
If this command is used with an AirLink RV50 Series gateway, the query or set
applies to the Active SIM. Use
*DATAPLANUNITSSIM2 to query or set a specific SIM card, based on the slot it
is installed in.
Query or set the units for the data usage report for the SIM card in Slot 1 (upper
slot).
AT*DATAPLANUNITSSIM1? to query
AT*DATAPLANUNITSSIM1=<unit> to set
<unit>=1—Sets the units to Megabytes (MB)
•
<unit>=2—Sets the units to Kilobytes (kB)
•
Examples:
AT*DATAPLANUNITSSIM1?
<unit>
OK
AT*DATAPLANUNITSSIM1=<units>
OK
465
*DATAPLANUNITSSIM1 or
AT Commands
41111088