Rev 1 Dec. 17
2. Go to the LAN tab.
3. Select Ethernet.
4. Refer to the instructions for setting the
VPN
My VPN connection is not working. When I try to debug it using the
logs on the Admin page, VPN information does not show up in the
log.
VPN information is collected in the Linux logs. To view this information:
1. Log into ACEmanager as User and go to Admin > Log.
2. In the drop-down menu beside Linux Syslog, ensure that Display is selected.
If you change the setting:
a. Click Apply.
b. Reboot the device.
3. Click View Log.
4. On the View Log page, click Clear and then click Refresh.
VPN Troubleshooting
491
Q & A and Troubleshooting
Starting Ephemeral Port
on page 116.
41111088