Sierra Wireless AirLink RV50 Series User Manual page 235

Hide thumbs Also See for AirLink RV50 Series:
Table of Contents

Advertisement

Table 9-2: Location: Servers 1 – 4
Field
Servers
—Configure where the reports are sent
Report Server IP
Address
Rev 1 Dec. 17
Description
IP address or FQDN (fully qualified domain name) of the server where location reports are
sent
Example: 192.100.100.100
The IP address can be for a local host or a remote server that is accessed over-the-air or
via a VPN tunnel.
If an IP with the last octet of 255 is configured (i.e. 192.168.13.255), a report would be
broadcast to all IPs on that subnet. When configured to a local host subnet, any connected
device would receive the report.
Note: If you want to use it as a LAN device, it must have a private IP address. If you want
to use a public IP address, use a Local IP report. (See
on page 243.)
You can also use an AT Command to set this value. For more information, see
page 449.
235
Local/Streaming—Local IP Report
*PPIP
Location
on
41111088

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents