ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table 9-2: Location: Servers 1 – 4
Field
Location Report Type
Rev 1 Dec. 17
Description
If the Location Report Format is Predefined, sets the type of location report.
Options are:
RAP
Location Data—RAP location report that contains only location data
•
Location+Date—RAP location report that contains location data with the UTC time
•
and date (default)
Location+Date+RF—RAP location report that contains location data, the UTC time
•
and date, and radio frequency information for the cellular connection
Location+Date+RF+EIO—RAP location report that contains location data, the UTC
•
time and date, radio frequency information for the cellular connection, and the current
I/O state
Note: The maximum satellite count for RAP reports is 15. If there are more than 15
satellites visible, RAP reports 15 satellites. To see the actual number of satellites, go to
Status > Location.
NMEA
NMEA GGA+VTG—NMEA location report that contains fix information, vector track,
•
and speed over ground
NMEA GGA+VTG+RMC—NMEA location report that contains fix information, vector
•
track, speed over ground, and recommended minimum location data
NMEA GGA+VTG+RMC+GSA+GSV—NMEA location report that contains fix infor-
•
mation, vector track, speed over ground, the recommended minimum location data,
overall satellite data, and detailed satellite data
TAIP
TAIP data—TAIP location report that contains position and velocity
•
Compact TAIP data—TAIP location report that contains the compact position
•
TAIP LN report—TAIP location report that contains a long navigation message
•
TAIP TM report—TAIP location report that contains the time and date
•
XORA
XORA data—location report used with Xora asset tracking
•
Note: Only RAP location reports can be configured to include odometer and digital I/O
information.
Note: You can also use an AT Command to set this value. For more information, see
*PPGPSR
on page 449.
234
41111088