Updating Only The Radio Module Firmware - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Rev 1 Dec. 17
Using AirLink Management Service (ALMS) to Update One or
Multiple AirLink gateways Over-the-Air
You can use AirLink Management Service to update the ALEOS software and
radio module firmware over-the-air on one or multiple AirLink gateways.
If you don't have an ALMS account:
1. In ACEmanager, go to the Services tab and ensure that ALMS is enabled and
the server URL is https://na.m2mop.net/device/msci/com
case, enter the correct URL, click Apply and then click Reboot.
2. Go to www.sierrawireless.com/ALMS
Updating to ALEOS software with an ALMS account:
1. Go to airvantage.net
2. Follow the instructions in the online ALMS documentation to update the
ALEOS software and radio module firmware.

Updating Only the Radio Module Firmware

Important:
This feature should be used only if directed by Sierra Wireless or an autho-
rized reseller.
If Sierra Wireless or your authorized reseller directs you to update only the Radio
Module Firmware:
1. Select the Radio Module Firmware button.
2. Select the appropriate firmware file for your gateway and click Update. This is
an .iso file named for the gateway's radio module and the mobile network
operator's network (or "GENERIC", if it is intended for more than one operator
network). For example, MC7354_GENERIC_2820.iso.
If you select a file for radio module firmware that is not supported on your
gateway, you will see a warning message similar to the following:
30
for more information.
and log in.
.
If this is not the
41111088