Sierra Wireless AirLink RV50 Series User Manual page 157

Rev 1 Dec. 17
Field Description
Public End Port Ending port for a range of ports on the public network.
•
•
Protocol The protocol to be used with the forwarded port:
•
•
•
Host IP IP address of the computer (or device) you want to forward data
to.
Private Start Port Port on the destination computer used as the port for single port
forwarding rules, or as the start port for a port forwarding range.
Port Forwarding Example
The following example shows you how to configure a port forward rule for a range
of 6 ports on an Ethernet-connected device:
1. In ACEmanager, go to Security > Port Forwarding, and enable Port
Forwarding.
2. Click "Add More" to display a rule line.
3. Enter 8080 for the Public Start Port.
4. Enter 8085 for the Public End Port.
5. Select TCP & UDP.
6. Enter 192.168.13.100 as the Host IP.
7. Enter 80 as the Private Start Port.
Figure 7-6: ACEmanager: Port Forwarding example
8. Click Apply.
9. Reboot.
157
For a single port forwarding, this field must be 0.
For a range of ports, this value must be greater than the
value in the Public Start Port field.
TCP—Only unsolicited data requests using TCP are
forwarded
UDP—Only unsolicited data requests using UDP are
forwarded
TCP & UDP—Unsolicited data requests using either TCP or
UDP are forwarded
Security Configuration
41111088