Enterprise Lan Management - Sierra Wireless AirLink RV50 Series User Manual

Rev 1 Dec. 17
Unless you have been advised by Sierra Wireless to do so, we recommend
that you do not install an unsupported version of the radio module firmware.
3. Click Update.
The radio module firmware update runs automatically and green check marks
appear beside each step as it is completed.
4. When the update is complete, the AirLink gateway reboots. The Software
Update progress window appears.
When the reboot is complete, you are returned to the Login screen.
5. After you log in, go to Status > About.
6. Check the Radio Firmware Version has been updated.

Enterprise LAN Management

You can use AirLink gateways in the following configurations:
• Standalone with a connection to a single device
When using the AirLink gateway with a single device, ensure that the device is
DHCP enabled.
host
• With a router
The router allows several devices to use the AirLink gateway's connection to
the network. When using the AirLink gateway with a router:
· Configure the router to be DHCP enabled.
And either:
· Configure the router to use Network Address Translation (NAT).
Or
31
AirLink gateway
Gateway Configuration
41111088