Services - Sierra Wireless AirLink RV50 Series User Manual

Table D-8: Services AT Commands
Command
AirLink Management System
*AVMS_ENABLE
*AVMS_INTERVAL
*AVMS_NAME
*AVMS_SERVER
*AVMS_STATUS?
*AVMS_AUTOSYNC
*AVMS_VERIFYPEER
*ENGHRS
Rev 1 Dec. 17

Services

Description
Query or set the ALMS activation status.
AT*AVMS_ENABLE? to query
AT*AVMS_ENABLE=n to set
n=0—Disable device initiated ALMS management
•
n=1—Enable MSCI protocol for ALMS management
•
n=2—Enable LWM2M protocol for ALMS management
•
n=3—Enable LWM2M protocol for ALMS management, with an
•
automatic Fallback to MSCI if communication fails
Query or set the ALMS communication (heartbeat) interval in minutes.
AT*AVMS_INTERVAL? to query
AT*AVMS_INTERVAL= n to set
n=INTERVAL (in minutes)
•
Assigns or queries the name to the AirLink gateway as it appears in ALMS.
AT*AVMS_NAME? to query
AT*AVMS_NAME=n to set
n=ALMS NAME
•
Query or set the ALMS server IP address or FQDN.
AT*AVMS_SERVER? to query
AT*AVMS_SERVER=n to set
n=IP Address or FQDN of ALMS server
•
Query the ALMS connection status.
Query or set ALMS autosynchronization of configuration parameters.
AT*AVMS_AUTOSYNC? to query
AT**AVMS_AUTOSYNC=n to set
n=0—Disable ALMS autosynchronization
•
n=1—Enable ALMS autosynchronization
•
Query or set peer certificate verification during SSL handshake.
AT*AVMS_VERIFYPEER? to query
AT*AVMS_VERIFYPEER=n to set
n=0—Disable peer certificate verification during SSL handshake
•
n=1—Enable peer certificate verification during SSL handshake
•
Query or set the number of hours the engine has been running.
AT*ENGHRS? to query
AT*ENGHRS=n to set
n=HOURS
•
Maximum value is 65535.
437
AT Commands
41111088