Sierra Wireless AirLink RV50 Series User Manual page 41

Advanced
IMSI
Cell ID
LAC / TAC
BSIC
Carrier
Aggregation
Indicator
PN Offset
Dynamic Mobile Network Routing (DMNR) is only supported on the Verizon Wireless network.
DMNR Status
DMNR Foreign
Agent
Registration
Status
DMNR Reverse
Tunnelling Agent
Status
Cell Info
Signal Strength and Quality
Different radio technologies have different ways of reporting signal strength and signal quality. The fields displayed in
ACEmanager depend on the type of network it is connected to. For details, see
Values on page 37.
Received Signal
Code Power
(RSCP)
Rev 1 Dec. 17
International Mobile Subscriber Identity number
Unique number that identifies each base transceiver station (BTS) or sector of a BTS within an
LAC
Location Area Code or Tracking Area Code (LTE)
Base Station Identity Code
Applies only to LTE-Advanced networks
Indicates whether or not carrier aggregation is enabled
Applies to RV50 Only
Base station identifier used in CDMA networks
DMNR status:
Enabled
•
Disabled
•
This field only appears if DMNR is enabled.
The status of transactions with the Home agent
Pass —Connected subnets registered or de-registered successfully
•
Fail—Unable to register or de-register connected subnets
•
Unknown
•
This field only appears if DMNR is enabled.
Status of the NEMO tunnel
Up
•
Down
•
Cell information such as the Base Station Identity Code (BSIC), TCH, Received Signal Strength
Indicator (RSSI), Location Area Code (LAC), and the cell ID
For additional information, including cell info for LTE networks, see
and LTE Networks on page 478.
The RSCP is the power measured by the receiver on a particular physical channel. It provides
an indication of signal strength for CDMA and UMTS connections. Expected values are in the
range of -50 dB to -120 dB.
41
*CELLINFO2?
Reported Signal Strength and Quality
Status
on page 401
41111088