Toolbar; Configuring Your Airlink Gateway; Saving A Custom Configuration As A Template - Sierra Wireless AirLink RV50 Series User Manual

Rev 1 Dec. 17
Click Back to return to the previous screen to select the correct version of
ALEOS.
If you have inadvertently entered Recovery mode, you can exit it by doing one of
the following:
• Press the reset button on the gateway to reboot it.
• Click the Reboot button on the Recovery screen.
• Wait 10 minutes. If no action is taken within 10 minutes of the device entering
Recovery mode (for example, if the Recovery screen has not been loaded by
the web browser), it automatically reboots and exits Recovery mode.

Toolbar

The buttons on the ACEmanager toolbar are:
• Software and Firmware: Updates the ALEOS software and the radio module
firmware
• Template:
· Download and save a configuration as a template
· Upload a saved template to apply settings
• Reboot: Reboots the gateway
• Refresh All: Refreshes all ACEmanager pages
• Help
• Logout

Configuring your AirLink Gateway

There are three options for configuring the AirLink gateway:
• Use your browser-based ACEmanager (as detailed in this guide)
• Use a terminal emulator application (e.g., Tera Term, PuTTY, etc.) to enter
AT commands for many of the configuration options.
• Use the cloud-based AirLink Management Service application (see
www.sierrawireless.com/products-and-solutions/gateway-solutions/alms/
more details.)
Saving a Custom Configuration as a
Template
If you have a gateway configured to match your requirements, you can use
ACEmanager to download and save that gateway's configuration as a template
and then apply it to other Sierra Wireless AirLink gateways.
Note: Sierra Wireless recommends that templates be created and applied to AirLink
gateways running the same version of ALEOS. If you apply a template created using an
older version of ALEOS to a gateway running a newer version of ALEOS, settings for
newly added features are not updated.
17
Gateway Configuration
for
41111088