Rev 1 Dec. 17
Figure 10-4: ACEmanager: Events Reporting > Actions > Action Type > Relay Link
4. In the Relay Type drop-down menu, select the desired Action:
· Relay 1—Open
· Relay 1, Inverted—Close
5. Click Apply.
The name you assigned to the Action appears under Actions. You can click on
this anytime to modify the settings.
6. Click Events on the menu on the left and follow the instructions on
Types
on page 260 to configure the Event you want associated with this
Action and to link the Action to the Event.
SNMP TRAP
To configure ALEOS to send an SNMP TRAP notification:
1. Ensure that SNMP is configured on the Services > Management (SNMP)
Management (SNMP)
page. (See
2. On the Events Reporting tab, select Actions from the menu on the left.
3. Enter the desired Action Name.
4. From the drop-down menu in the Action Type field, select SNMP TRAP.
Figure 10-5: ACEmanager: Events Reporting > Actions > Action Type > SNMP TRAP
5. Click Apply.
The name you assigned to the Action appears under Actions. You can click on
this anytime to modify the settings.
253
Events Reporting Configuration
.)
on page 212
Event
41111088