Rev 1 Dec. 17
Note: Some of the configuration commands listed here are only available as AT commands.
Reference Tables
Result codes are not shown in the command tables unless special conditions
apply. Generally the result code OK is returned when the command has been
executed. ERROR may be returned if parameters are out of range, and is
returned if the command is not recognized or is not permitted in the current state
or condition of the AirLink gateway.
Note: Unless otherwise stated, all commands are accessible locally and remotely.
AT command topics in this appendix:
•
Standard (Hayes) commands
•
Device Updates
on page 400
•
Status
on page 401
•
WAN/Cellular
on page 407
•
LAN
on page 427
•
VPN
on page 430
•
Security
on page 436
•
Services
on page 437
•
Location
on page 446
•
Serial
on page 453
•
I/O
on page 464
•
Applications
on page 464
•
Admin
on page 468
399
on page 453
AT Commands
41111088