Sierra Wireless AirLink RV50 Series User Manual page 236

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table 9-2: Location: Servers 1 – 4
Field
Report Server Port
Number
Rev 1 Dec. 17
Description
Destination port on the server where location reports are sent
The destination port can be the same for all servers or you can configure a different
destination port for each server. Options are: 1–65535
Defaults:
Server 1 destination port: 22335
•
Server 2 destination port: 22336
•
Server 3 destination port: 22337
•
Server 4 destination port: 22338
•
You can also use an AT Command to set these values. For more information, see
*PPPORT on page 451.
Note: If the account is behind a firewall (for example, an account that is not Internet-
routable), the report may be redirected to come from a different source port when it arrives
at the server.
The source ports on the device are not configurable. The following source ports are used:
Protocol
RAP / NMEA
TAIP
XORA
236
Server Port
1 17335
2 17345
3 17346
4 17347
1 21000
2 21001
3 21002
4 21003
1 9494
2 9495
3 9496
4 9497
41111088