Field
Host Authentication
Mode
Host User ID
Host Password
Rev 1 Dec. 17
Figure 5-11: ACEmanager: LAN > PPPoE
Description
Host Authentication Mode: Use PAP or CHAP to request the user login and password
during PPP or CHAP negotiation on the host connection. The username and password set
in *HOSTUID and *HOSTPW is used.
NONE (default)
•
PAP and CHAP
•
CHAP
•
User ID for authentication (up to 64 bytes)
Password for authentication
Configure the AirLink gateway to Support
PPPoE
Note: You must disable the DHCP server for PPPoE to work.
To configure an AirLink gateway to support PPPoE:
1. In ACEmanager, go to LAN > Ethernet.
2. Under General, in the DHCP Server Mode field, select Disable.
Note: PPPoE authentication is optional. If you use PPPoE authentication, no other
tethered LAN connection will have network access, regardless of whether or not the
PPPoE host is connected. If you are using non-authenticated PPPoE, other tethered LAN
connections will have network access until a PPPoE host is connected.
125
LAN Configuration
41111088