Sierra Wireless AirLink RV50 Series User Manual page 290

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Field
Monthly Limit
Monthly Limit
Current Monthly
Start of Billing Cycle
(Day of Month)
Previous Day
Previous Daily Usage
Rev 1 Dec. 17
Description
This is the user-specified monthly data usage limit (in MB or KB,
depending on the option selected in the
accumulates on a monthly basis and on the date you specified (the
"rolling month"). Data usage accumulates during the month until the
end of the next billing period, at which point the data usage totals are
reset.
Note: The Monthly Limit value
a whole number) and
Note: Monthly usage is cleared at midnight, UTC on the last day of the
billing cycle.
Caution:
conditions in ALEOS. Data usage may run over the amount set in this
field before the action specified for the threshold trigger takes effect.
Displays the current monthly data usage (in MB or KB, depending on
the value configured in
Note: Data usage includes data sent and data received.
Enter the desired start of the billing cycle. For example, 3 (Day 3 of
every month)
Changing the value in this field resets the
Shows the data usage for the previous day (in MB or KB, depending on
the value configured in
Note: Data usage includes data sent and data received.
Step 2—Configure Event Reporting
1. In ACEmanager, go to Events Reporting > Actions.
290
MUST
NOT as a fraction (e.g., "3.5")
Data usage limits are approximate and based on reporting
Plan Units on page 288.)
Plan Units on page 288.)
Plan Units field). Data usage
be expressed as an integer (i.e.,
Current Monthly field to zero.
41111088