Location - Sierra Wireless AirLink RV50 Series User Manual

ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Error message
Radio Module package MD5
sum is missing from JUD file
Radio Module firmware MD5
check failed
Radio Module backup failed
Radio Module firmware
download failed
Undefined Radio Module
firmware URL
Radio Module firmware
update failed
a. ALMS technical support:
Rev 1 Dec. 17
Meaning
JUD file is not valid. The Radio Module
Firmware MD5 sum is a mandatory field.
The downloaded firmware package failed the
integrity check. The update is aborted.
The radio module was saved to prevent a
power failure. If the firmware cannot be
backed-up on persistent storage, the firmware
update will not proceed because of the risk
that the radio module update will not be able to
finish if interrupted.
Firmware URL is not valid, or download failed.
The URL cannot be retrieved. The update is
aborted.
Radio module firmware could not be applied.
Check the ALEOS log messages to determine
exactly why the update failed.
https://issues.m2mop.net

Location

I set the Location Reports Port field on the Location > Local
Streaming page to stream Location data to a USB port, but I don't
see Location data on the USB port.
The Location streaming feature works with serial devices. To stream data to a
USB port, you must first configure the USB port to act as a serial device.
1. In ACEmanager, go to the LAN > USB tab.
2. In the USB Device Mode field, select USB Serial.
3. Click Apply.
If you have not already done so:
1. Go to Location > Local Streaming.
2. In the Location Reports port field, select one of the following:
· USB Serial
· DB9 and USB
3. Click Apply.
4. After you have made all the configuration changes, reboot the device.
496
Corrective action
There is a problem with the package on
the ALMS server. Contact ALMS
a
support .
There is a problem with the package on
the device or the download may have
failed. Try downloading the file again. If
the problem persists, contact ALMS
a
support . There may be a problem with
the package on the ALMS server.
a
Contact ALMS support . The support
team will need to access the device to
clear space, or you can return the device
to Sierra Wireless under an RMA.
Retry several times. If the problem
persists, contact ALMS support
support team will need a log from the
device.
Retry. If the problem persists, contact
a
ALMS support .
Retry. If the problem persists, contact
a
ALMS support .
a
. The
41111088