Field
Outbound Port
Filtering Mode
Start Port
End Port
Rev 1 Dec. 17
Description
Allowed and blocked ports through which traffic is either allowed or blocked (respectively)
are listed. Options are:
Disable (default)
•
Blocked Ports—ports through which traffic is blocked (Shown in Filtered Port s list)
•
Allowed Ports—ports through which traffic is allowed (Shown in Filtered Port s list)
•
Note: Outbound IP filter supports up to 9 ports.
The first of a range or a single port on the LAN
The end of the range on the LAN
Trusted IPs—Inbound (Friends)
—
Trusted IPs
Inbound restricts access to the AirLink gateway and all LAN
connected devices.
Tip:
Trusted IPs-Inbound was called Friends List in legacy AirLink products.
When enabled, IP packets with a source address not matching those in the list or
range of trusted hosts will be ignored/dropped by the gateway.
Note: Inbound restrictions do not apply to responses to outbound data requests. To restrict
outbound access, you need to set the applicable outbound filter.
Figure 7-10: ACEmanager: Security > Trusted IPs - Inbound (Friends)
161
Security Configuration
41111088