ALEOS 4.9.0 Software Configuration User Guide for AirLink RV50 Series
Table D-2: Status AT Commands
Command
*NETOP?
*NETPHONE?
*NETRSSI?
*NETSERV?
*NETSERVICE_RAW?
*NETSTATE?
*NETSTATE_RAW?
+PRL?
*PRLSTATUS?
Rev 1 Dec. 17
Description
Query the Mobile Network Operator of the active connection. If you are roaming, the
roaming operator is returned, if the home operator allows this.
Query the device's cellular phone number, if applicable or obtainable.
Query the current RSSI (Receive Signal Strength Indicator) for non-LTE cellular
connections, as a negative dBm value.
Query the current connection type (e.g., LTE, HSPA+, EV-DO Rev A, etc.).
Query the numeric value for the network service type.
8—2G (1x, EDGE, GPRS)
•
10—2G roaming
•
16—3G (EV-DO Rev. A, HSPA, HSPA+, UMTS)
•
18—3G roaming
•
64—4G
•
Query the network state of the current WAN connection.
AT*NETSTATE? returns:
Network Ready—The gateway is connected to the WAN network and ready to
•
send data.
Network Ready - Wi-Fi —The gateway is connected to a Wi-Fi network in client
•
mode.
Network Ready - Ethernet —The gateway is connected to an Ethernet WAN
•
network.
Network Link Down — The network link is not available.
•
No Service—There is no mobile network detected.
•
Query the network state of the current WAN connection.
AT*NETSTATE_RAW? returns:
5—Network Ready (The gateway is connected to the WAN network and ready to
•
send data.)
29—Network Ready - Wi-Fi (The gateway is connected to a Wi-Fi network in
•
client mode.)
34—Network Ready - Ethernet (The gateway is connected to an Ethernet WAN
•
network.)
0—Network Link Down (The network link is not available.)
•
7—No Service (There is no mobile network detected.)
•
CDMA and LTE fallback to EV-DO only.
Query CDMA Preferred Roaming List (PRL) version.
CDMA only
Query the status of the most recent PRL update.
n=0—None (No update)
•
n=1—In progress
•
n=2—Update successful
•
The return of any other value indicates that the update failed.
406
41111088